The efficiency of air nipper on a robot

- Aug 28, 2019-

Use of gas shear:




    Gas shear can be fully automated in the matching of the robot, which can greatly increase the output and the amount of personnel in production. Jiaotian gas shearing has occupied an invaluable position in the gas shear industry. Robotic automated use of gas shear can replace the manual workload to automatically cut the plastic nozzle. It is the output improvement and the quality of the products. Now the enterprises are using fully automated production. In the next 10 years, the world will adopt a fully automated production.








    Pneumatic scissors




    Precautions




    First, pay attention to the size of the body using the specified air pressure. The use of the air pressure is too small, which will affect the blade's ability. If the blade is too large, the blade will be damaged and the internal piston will be broken.




    The second blade and the center of the body are special materials. Do not use substitutes. The use of replacement screws will cause the body screws to "ream" and cause the blade to be damaged. The body reaming will no longer be used.




    The three-blade must not use items other than those specified and beyond the capacity specification.




    4. Replace the blade to close the air pressure and avoid the "empty shear"




    Five to avoid the body and the blade fell




    If the six bodies are pressed, they must not be adjusted by themselves to avoid inoperability.






    Instructions




    The air pressure (air compressor) should be closed before the blade and the body are installed.




    2. Confirm the air pressure specified by the body (the amount of air pressure used in the body size is also different)




    Three-blade use is used as much as possible in the middle of the working length of the blade




    After using the air, the air pressure (air compressor) must be turned off.




    


    Simple maintenance




    The air compressor must be connected to the water filter to prevent the water from causing the rust on the blade and the body. The blade can be wiped with oil to prevent rust.




    The inside of the body can be detached. Wipe the spring and the piston with a dry cloth and apply butter to check whether the piston ring is aging.




    If you have the ability to cut, please check if the air pressure is within the specified range and whether the blade is damaged or deformed.








    Metal blade




    Precautions




    1. For plastic, iron and stainless steel wires, plastic objects should not be used.




    2. Pay attention to the scope of the blade and the model of the body




    3. Pay attention to the body limit pressure






    Instructions




    1. Please read the instructions in the box before use.




    2. Please connect the tools before connecting the air source (air compressor)




    3. Please confirm that the air source air pressure should be set within the specified range before use to avoid damage to the tool.




    4. Please put it on a stable place when not in use for a short time to prevent falling.






    Maintenance




    1. The air source (air compressor) must be connected to the water filter to prevent moisture from entering the tool and causing corrosion.




    2. When not in use for a long time, it is necessary to apply oil to the metal surface and the joints of the bearings to avoid corrosion.




    3. The internal lubrication of pneumatic scissors requires the use of butter. Never use oiling device to lubricate with oil to avoid insufficient lubrication.






    Easy maintenance




    When the tool cannot be operated, please make sure that the air source is normally supplied with air (air compressor power supply, air connector switch is open)








    Plastic blade




    Precautions




     1. Applicable to plastic objects, metal objects should not be used.




     2. Pay attention to the scope of the blade and the model of the body




     3. Pay attention to the body limit pressure






    Instructions




    1. Please read the instructions in the box before use.




    2. Please connect the tools before connecting the air source (air compressor)




    3. Please confirm that the air source air pressure should be set within the specified range before use to avoid damage to the tool.




    4. Please put it on a stable place when not in use for a short time to prevent falling.






    Maintenance




    1. The air source (air compressor) must be connected to the water filter to prevent moisture from entering the tool and causing corrosion.




    2. When not in use for a long time, it is necessary to apply oil to the metal surface and the joints of the bearings to avoid corrosion.




    3. The internal lubrication of pneumatic scissors requires the use of butter. Never use oiling device to lubricate with oil to avoid insufficient lubrication.






    Easy maintenance




    When the tool cannot be operated, please make sure that the air source is normally supplied with air (air compressor power supply, air connector switch is open)