Vacuum blower

- Apr 27, 2019-

Special point of product quality


DIN VDE 0105 or IGC 364 regulations, non qualified personnel shall not be engaged in electrical equipment work. Qualified personnel: refers to the factory safety responsible 

 person authorized personnel. According to their own training, experience, knowledge and ability related standards on prevention of accidents to complete a necessary work,

 and to realize the potential The risk and take the necessary preventive measures. It is necessary to life first aid knowledge, familiar with the life rescue equipment related.



Came with the equipment operating instructions may not contain detailed information all of the factors related, in particular, can not put every possible installation, are related

 to the operation and maintenance of way. The manual includes only can let the qualification Information necessary for correct operation personnel of machines or equipment. 

 Therefore, it is necessary to clarify, if lack of detailed parameters of products, or related questions, please according to the type of equipment and processing code for this 

 product, contact us


Tolerance standard: motor meets the standard of DIN EN 60 034/DIN IEC 34-1, insulation class H.


image

Vacuum compression type curve:


the performance curves are valid for pumping air at 15°c at the inlet flanges with an air pressure of 1.103 mbar of ±10%.the total

pressure differences are valid up to an intake and ambient of 25°c.


image


1AC 220V Gas ring pump model and performance parameter table (IP55 50/60HZ)

image


Vacuum compression type curve:

the performance curves are valid for pumping air at 15°c at the inlet flanges with an air pressure of 1.103 mbar of ±10%.the total

pressure differences are valid up to an intake and ambient of 25°c


image