Introduction and Application:
The three-way vacuum solenoid valve is a direct acting of two positions, a conical spool, normally open or normally closed
The valve is usually used in the vacuum cut of the feeder, the suction cup stacker, the robot, the bag opener, etc., which need to be quickly reacted between the suction and the intake air in the line, and can also be guaranteed in the case of power loss or no air pressure. Vacuum connection
Since the valve can not normally change the hole position when the pressure difference is small, the valve cannot be used in the case of low vacuum.
The valve has no friction and internal dynamic stress, and the response speed is fast and the service life is long.
Structure:
The body is made of aluminum alloy
Solenoid valve controls piston action
The body is made of aluminum alloy
Solenoid valve controls piston action
When the valve is used as a normally open, (1) is the pressure relief port, (2) is the action port, and (3) is the vacuum pump interface.
When the valve is used as a normally closed, (1) is the vacuum pump interface, (2) is the action port, and (3) is the pressure relief port.
Design Parameters：
Technicial Parameters：
